Kakyoeng Engineering : Product

Product

Product

Customer Center
I will always listen to the customer's voice.
+82.2.2618.5228
FAX : +82.2.2618.5226
Sensing edge

2. Sensing Edge Switch

제품사진
It is a switch with built-in tape switch.
It has excellent chemical resistance due to its drip proof specification and is easy to install. It is easy to replace in the field.
Because it also works with the power from the side, it is ideal for monitor doors and shutters of the vehicle.

2-1.Various switches and features

Introduces various lineups and features of the sensing edge. Please note that the operating force depends on the tape switch you use.
Over travel is the distance from the operating position (stroke) to the push and stop position by pressing the switch.
Total travel (possible) Distance = stroke + overtrouble.
* We ask for consultation separately about size of standard product and more

1).TS-6 (Black, Red, Hoe, Transparent)

제품사진
((A) Operational pressure: 5N
(B) Over Travel: 2.3mm
(C) Uses and Features
A soft, high-sensitivity switch can be used for small automatic doors, medical devices, conveyors, and auto warehouses.
(D) Maximum Possible Fabrication Specifications(A) Operational pressure: 5N
(B) Over Travel: 2.3mm
(C) Uses and Features
A soft, high-sensitivity switch can be used for small automatic doors, medical devices, conveyors, and auto warehouses.
(D) Maximum Possible Fabrication Specifications

2).TS-16 (black and red) people)

제품사진
(A) Operational pressure: 13N
(B) Over Travel: 4.5mm
(C) Uses and Features
A soft, high-sensitivity switch can be used for small automatic doors, medical devices, conveyors, and auto warehouses.
(D) Maximum Possible Fabrication Specifications
STANDARD : 3.0 m
(Max: 4.8 m) ※Consultation.

3).TS-108 (Black)

제품사진
(A) Operational pressure: 20 N
(B) Over Travel: 7.3mm
(C) Uses and Features
Safety switch for robot, unmanned vehicle door. suit the detection of a collision
(D) Maximum Possible Fabrication Specifications
HOUSING:7.0 m
Channel up to 3.0m
The maximum channel 7.0 m is disassembled and assembled

4).TS-26 (Black, Red and Yellow)

제품사진
(A) Operational pressure: 27N
(B) Over Travel: 3.8mm
(C) Uses and Features
Safety switch for elevator doors, unmanned vehicle bumpers, and large doors.
(D) Maximum Possible Fabrication Specifications
Standard Part:3.0m
Up to 4.8 m (consultative)

5).TS-29 (Black)

제품사진
(A) Operational pressure: 68 N
(B) Over Travel: 43mm
(C) Uses and Features
Switch for various bumper automatic doors. EPDM provides good weather resistance.
(D) Maximum Possible Fabrication Specifications
HOUSING:7.0 m
Channel up to 3.0m
The maximum channel 7.0 m is disassembled and assembled.

6.TS-46 (Black)

제품사진
(A) Operation Pressure: 42N
(B) Over Travel: 14mm
(C) Use and switch for various bumper types of automatic doors. Robust, cushioned and also works with lateral forces
(D) Maximum Available Fabrication Specifications:2.4m Up to 4.8m (Consultative)

7)TS-47(Black and Enemy)

제품사진
(A) Operational pressure: 16 N
(B) Over Travel: 22mm
(C) Uses and Features
Switch for crash detection on high sensitivity door edge switch.
(D) Maximum Possible Fabrication Specifications
Standard item:3.0m
Up to 4.8 m (consultative)

8).TS-48(Black and Enemy )

제품사진
(A) Operational pressure: 49.2 N
(B) Over Travel: 14mm
(C) Switch for various bumper applications and features. It's strong, cushioned, and works with force from the side.
(D) Maximum Possible Fabrication Specifications
Standard item:3.0m maximum
4.8 m (consultative)

9).TS-57(Black, red, and yellow)

제품사진

(A) Operational pressure: 16 N
(B) Over Travel: 60mm

(C) Usage and Characteristics High sensitivity door edge switch for crash detection.
(D) Maximum Possible Fabrication Specifications:3.0m Up to 4.8 m (consultative)

10).TS-110 (Black and Red)

제품사진
(A) Operational pressure: 14N
(B) Over Travel: 2.3mm
(C) Uses and Features
Application and Features
Safety switch on moving parts (Read mounted R : 100). mainly on hydraulic lifts
I'm using it for safety.
(D) Maximum possible fabrication specification (see drawing)
Maximum buildable length
Housing 10m
Channel Maximum Length 3m
The maximum length is 10 m channel split.

2-2.Sensing Edge Switch Handling Precautions

1).General precautions

(1) Do not pull the lead wire or use it as a tool for installation or transportation. It may cause disconnection.
(2) Please do not use nails or screws because it will cause short-circuit when installing the sensing edge. When fixed, the specified adhesive, double-sided tape,We recommend using channels and joint construction.

2).Environment

(1) Use within the temperature range specified in the specifications.
(2) Use in flooded condition is dangerous. (Waterproof, spinning depends on the product.)
(3) The switch is always off type. Avoid putting it in the ON state for a long time with heavy load.

3).Electrical rating

For safety reasons and to preserve the life of the switch, please use it with a certain voltage and current value.
Maximum AC 100V, DC 30V, 1A capacity, please use AC, DC 30V, 1A

4).guarantee

The warranty period of the delivered product will be one year after delivery. During the warranty period, if the fault occurs due to the responsibility of the company, the defective product will be replaced or repaired free of charge. However, please note that the following cases will be excluded from the warranty.

(1) In case of use in other than the conditions of use such as catalog, specification, etc.
(2) If there is a requirement for users to modify the supplied product

(3) When the cause of the trouble is other than the delivered product
(4) Failure to observe the handling precautions Note: Warranty is a guarantee for the delivered product and does not include any other damage caused

5).Channel specification

제품사진

Lead wire direction

There are five ways to discharge the lead wire. Specify a discharge method when estimating (4-wire safety device).

EE: To both sides
OE: One side only
RH: Both ends (right) End of Angle Channel
LH: Both ends (left) Angle channel end
BOT: Floor surface
※ If you would like a special method, please feel free to contact us.

제품사진

6).Special specification of sensing edge switch

We will introduce the detection edge that will be used for stage equipment and unmanned buggy car buggies.
It is a curved and curved sensing edge that allows "bend" on the common sense edge.
(1) Horizontal curve sensing edge switch
Side bending possible with a radius of 760mm or more
• There is also a bend in the channel (plastic channels only)
• Use: Hospital facilities for special stage devices, gymnasium facilities, etc.
제품사진
(2) Bending compatible sensing edge switchAllows for bending with a radius of 100 mm or less
• There is also a bend in the channel (aluminum channel only)
• Usage: Printing machine, AGV bumper
제품사진