Kakyoeng Engineering : Product

Product

Product

Customer Center
I will always listen to the customer's voice.
+82.2.2618.5228
FAX : +82.2.2618.5226
Various switches
HOME > Product > Various switches

1-10.Load switch

Introducing the "Road Switch" which is used to detect the passage of vehicles, which is used as entrance and exit of parking lot.
RBS type is not attached to the mounting channel, but if you wish to deliver RBMA type.
제품사진

1) Load Switch Features

□ Operation force: 5 ~ 10kg
□ Install the intermediate fixture at 500 mm intervals (standard).NOTE: You are subject to special intervals.
□ Load capacity: about 1 ton
□ Waterproof: Sealed Waterproof Type
□ Standard Cable: 2m (Cab Tire Cord)
applicationSwitch for vehicle pass detectionSwitch for vehicle speed measurement

2) Application

□ Switch for vehicle notification
□ Switch for vehicle speed measurement

1-11. RBS type

Installation channel is not specified.
It is fixed with the adhesive on the road surface.
Put the end cover on both ends.
제품사진

1-12.RBMA type

Mounting channels and end protectors (2 pieces) are used for RBS type.
제품사진

Other Switches

Light curtains, foots, and touch pad switches.
In addition to tape switches and mat switches, various switches are equipped.
Please choose it according to the application such as the light sensor or the foot switch.

Light Curtain B series

제품사진
Safety category 4 (IEN61496)
High Sensitivity, Wide Area Sensing Photodiode Sensor
Safety output: 2 x PNP (fail safe)
Detection ability: 14mm, 30mm, 70mm (optional)
Carton length: 200mm ~ 1800mm (type designation)
Detection distance: up to 13m (depending on model) Rich
Accessories: Mounting stand, Mirror Ascii programmable cutting device, Alignment adjustment laser interface
Controller etc.

Foot switch

Adjusts the mechanical on / off
Seal material PVC sealing structure
model 11
Specification 127 (length) x50 (width) x95 (thickness)
Operating load 29N
model 11
Specification 127 (length) x50 (width) x95 (thickness)
Operating load 20N

※ Standing work chairs selected by work

Touchpad

제품사진
Easy to install and durable
Seal material PVC sealing structure




Model TP-2
standard 50（Length）×50（width）×10（thickness）mm
Operating load 28N
Model TP-4
standard 106（Length）×106（width）×14（thickness）mm
Operating load 30N
제품사진

Model NO-1
standard 37（diameter）×5.5（thickness）
Operating load 16N
Model NO-1R
standard 27.5（Length）×22（width）×5.5（thickness）mm
Operating load 13N
※ There is a contact type and b contact type.
 

Flex Actuator

제품사진
It is sensed when you touch and bend - it repeats this motion as it was originally.
1.PVC Body # 2570
PVC switch cover
Flex Actuator
2. Aluminum body # 2580
PVC switch cover
Flex Actuator
3. Stainless steel body # 2590
PVC switch cover
Flex Actuator
Characteristic
Three kinds of body material
• Robust and reliable
• Mounting material (with universal bracket)
• Waterproof (IP67)
Application • Limit switch
• Position instructions
• For counter • Stop switch
• Door and hatch opening and closing detection

Specifications

Switch thread length 76mm
Operating pressure 1.1N
Motion angle maximum 90°
Minimum operating angle ＞5°
Working Voltage 28V（AC or DC）Max 1A
Contact Life More than 1 million times